Wednesday, November 4, 2015

Set Your Chipper Up

Set-Up Instructions:

Your chipper does need to be set up prior to installation. It arrives in a steel crate that can be dismantled in minutes. See assembly instructions the in-feed bin and discharge chute are shipped with the unit and are located in the bottom of the steel crate.

Visually inspect the in-feed bin, and the fly wheel before attaching to tractor, and applying power to ensure that nothing is in the chipper head. If the chipper deflector or any of the guards have been removed for shipping, be sure to replace them properly before use.

The PTO (Drive Line) is also shipped with the unit and is located in the bottom of the steel crate.

When mounting, keep the chipper as close to the tractor as possible.

Important - Make sure that the PTO shaft is sized properly.

While in use, keep the PTO shaft as straight as possible. No more than 15 degrees from level is acceptable.
Do not operate the chipper without the chip deflectors, and or drive belt cover properly in place.

Order Your WM-8M Today By Clicking The Link Below!

Facebook Page:
Twitter Feed:
Tumblr Page:
Blog Spot:
WordPress Site:
LinkedIn Profile:

Phone # 1-855-966-3629
Address: 42 Jackson Street, Akron, NY, 14001
Hours of Operation: Monday through Friday 8am to 5pm Eastern Time

#IndustrialChipper     #PTOChipper   #BestPTOChipper   #BestPTOdrivenWoodChipper   #WoodChipper   #BestWoodChipper   #PTOwoodChipperForSale   #IndustrialWoodShredder   #ChipperShredderMulcher   #PTOhydraulicWoodChipper   #IndustrialWoodShredder   #CommercialWoodChipper   #CommercialWoodChipperForSale     #TractorMountedWoodChipper   #TractorMountedWoodChipperForSale   #WoodChipperPTO   #CommericalWoodChipper   #PTOdrivenWoodChipper