Watch the WM-8M Mechanical PTO Wood Chipper In Action!

Walk Around The WM-8M Mechanical PTO Wood Chipper!

Drive Line Safety Tips & Instructions

DRIVE LINE SAFETY TIPS

Agriculture and forestry are recognized as one of the most hazardous occupations. Today's farmer spends long hours in close proximity to increasingly and powerful machinery.

To avoid accidents, everyone from the component supplier and the company who manufacturers and assembles the machinery, to the dealers and ultimately the actual user, must keep safety in mind. The checklist below relates to the drive line of agricultural implements, general safety literature, and the standards published by the American Society of Agricultural Engineers.

DRIVE LINE SAFETY CHECKLIST

Drive-Line Specifications - The first step towards safe applications is to specify and test the drive-line so that it operates properly under expected field conditions.

1. Specify and test the proper size joints and telescoping members based upon the power required by the implement, speed of rotation, joints, angles, shock loads, and expected life.
2. Test the hitch geometry to prevent the drive line from:

• Extending beyond the recommended maximum length.
• Bottoming out.
• Reach a position that allows universal joints to lock.
• Exceeding the maximum allowable angle for constant velocity of the universal joints

Information concerning these par maters may be found in all drive-line manufacturer's catalogs.

      3. Specify and test telescoping members to allow the lowest possible thrust loads, considering the           expected working conditions.

      4. Specify and test torque limiters to control excessive shock loads.

      5. Where necessary, specify and test overrunning clutches to prevent inertial loads from                           overpowering the tractor.

DRIVE LINE SAFETY CHECKLIST

Hazard Reduction - The second step in specifying a safe drive-line application is to strive to eliminate as many hazards as possible.

1. On drive-line with torque limiting or overrunning devices, specify that the device be positioned to the end of the drive-line by the implement.
2. For implement connections which require bolts or set screws, select and/or supply hardware which minimizes protrusions. Information concerning these parameters may be found in all drive-line manufacturer's catalogs.
3. For tractors PTO Shaft connections, specify a safety type yoke (twist or slide collar to minimize protrusions.
4. Provide a proper clearance zone for the operation of the drive-line, to avoid damaging the shielding components.

Some common areas of interference are:

• Three point linkage.
• Extended or eye loop hitch pins.
• Hydraulic hoses.

Guarding - For hazards which cannot be eliminated effectively, guarding must be provided whenever feasible.

The PTO master shield, integral drive-line shield, and implement input connection shield should provide an interactive guarding system.

1. Provide instructions by labels or manuals. The implement should be used only with the tractor's PTO master shield in place.
2. Specify and test an integral drive-line shield with end cones which overlap, but not interfere with the PTO master shield or implement input connection shield.
3. Provide an implement input connection shield to interact with the integral drive-line shield to provide guarding of the shaft coupling and any torque limiting devices installed on the drive line.
4. Check that all routine maintenance of the drive-line can be done without removal on  the shields.

Warnings and Instructions - Provide warnings and instructions for hazards associated with the machine. Provide instructions for proper maintenance and repair.

1. Provide labels on the unit to advise the user of proper hitch dimensions and maximum safe operating speed.
2. Check that proper danger labels are supplied with the drive-line concerning these par maters amy be found in all drive-line manufacturer's catalogs.
3. Provide easy-to-understand instructions for proper drive-line concerning these parameters may be found in all drive-line manufacturer's catalogs.
4. Advise against the use of PTO adapters which may defeat the purpose of the tractor's master shield and adversely affect the performance of the drive-line.
5. Advise the user of locations of genuine original equipment spare parts.

Further information about drive-line specifications and safety may be obtained from your drive-line supplier and the following ASME standards and engineering practices:

S203 - Rear power take-off for agricultural tractors

S205 - Power take-off definitions and terminology for agricultural tractor

S207 - Operating requirements for tractors and power take-off driven equipment implements

S318 - Safety for agricultural equipment

S331 - Implement power take-off drive-line specifications

S333 - Agricultural tractor auxiliary power take-off drives

S350 - Safety alert symbol for agricultural equipment

S441 - Safety signs

S493 - Guarding for agricultural equipment

EP363 - Technical publications for agricultural equipment

Other standards may apply for particular types of implements. All drive-line manufacturers strive to produce a safe product. Drive-lines, like most other components must be used properly, including the use of proper tractor master shields and implement input connection shields. Please contact us if you have any questions about your drive-line applications.

Official Website: http://www.woodmaxx.com

Facebook Page: http://www.facebook.com/woodmaxx

Twitter Feed: http://www.twitter.com/woodmaxxltd

Tumblr Page: http://woodmaxxltd.tumblr.com/

Blog Spot: http://woodmaxxltd.blogspot.com/

WordPress Site: https://ptowoodchipperblog.wordpress.com/

LinkedIn Profile: https://www.linkedin.com/pub/woodmaxx-power-equipment-ltd/51/800/469

Phone # 1-855-966-3629

Email: woodmaxxltd@gmail.com

Address: 42 Jackson Street, Akron, NY, 14001

Hours of Operation: Monday through Friday 8am to 5pm Eastern Time

Set Your Chipper Up

Set-Up Instructions:

Your chipper does need to be set up prior to installation. It arrives in a steel crate that can be dismantled in minutes. See assembly instructions the in-feed bin and discharge chute are shipped with the unit and are located in the bottom of the steel crate.

Visually inspect the in-feed bin, and the fly wheel before attaching to tractor, and applying power to ensure that nothing is in the chipper head. If the chipper deflector or any of the guards have been removed for shipping, be sure to replace them properly before use.

The PTO (Drive Line) is also shipped with the unit and is located in the bottom of the steel crate.

When mounting, keep the chipper as close to the tractor as possible.

Important - Make sure that the PTO shaft is sized properly.

While in use, keep the PTO shaft as straight as possible. No more than 15 degrees from level is acceptable.
Do not operate the chipper without the chip deflectors, and or drive belt cover properly in place.

Order Your WM-8M Today By Clicking The Link Below!
http://www.woodmaxx.com/WM_8M_Mechanical_PTO_Wood_Chipper_p/wm-8m.htm

Website: www.woodmaxx.com
Facebook Page: http://www.facebook.com/woodmaxx
Twitter Feed: http://www.twitter.com/woodmaxxltd
Tumblr Page: http://woodmaxxltd.tumblr.com/
Blog Spot: http://woodmaxxltd.blogspot.com/
WordPress Site: https://ptowoodchipperblog.wordpress.com/
LinkedIn Profile: https://www.linkedin.com/pub/woodmaxx-power-equipment-ltd/51/800/469

Phone # 1-855-966-3629
Email: woodmaxxltd@gmail.com
Address: 42 Jackson Street, Akron, NY, 14001
Hours of Operation: Monday through Friday 8am to 5pm Eastern Time

#IndustrialChipper     #PTOChipper   #BestPTOChipper   #BestPTOdrivenWoodChipper   #WoodChipper   #BestWoodChipper   #PTOwoodChipperForSale   #IndustrialWoodShredder   #ChipperShredderMulcher   #PTOhydraulicWoodChipper   #IndustrialWoodShredder   #CommercialWoodChipper   #CommercialWoodChipperForSale     #TractorMountedWoodChipper   #TractorMountedWoodChipperForSale   #WoodChipperPTO   #CommericalWoodChipper   #PTOdrivenWoodChipper

The WoodMaxx WM-8M PTO Wood Chipper

 Blog Page For Our WM-8M PTO Wood Chipper

   

WoodMaxx WM-8M PTO Wood Chipper
 

 

The WoodMaxx™ WM-8M mechanical auto-feed wood chipper is a robust self-feeding PTO driven wood chipper attachment that mounts to the 3 point hitch of your tractor. This PTO wood chipper is compact, yet built to withstand rigorous use. Dual in-feed rollers grab and pull material into the chipper head using a sturdy belt driven gear box and drive axle system.

 

 

 

High quality (A8 tool steel) made in the U.S.A. chipper knives are standard equipment on all WM-series wood chippers. Check out these features.

The WoodMaxx™ WM-series chippers are so unique and innovate that they are now patent pending. Attempts have been made to copy this machine, but there is only one WoodMaxx™!

Website : http://www.woodmaxx.com

Phone # 1-855-966-3629

Email : woodmaxxltd@gmail.com

Address : 42 Jackson Street, Akron, NY, 14001

 

Click Here To Order Your WM-8H PTO Wood Chipper Today!